Y TYPE CONTROL VALVE

2/2 Way Pneumatic Cylinder Operated Investment Casting Control Valves, Y TYPE CONTROL VALVE.

Actuator

Body SS304 Pressed
Cover Flange ASTM A351 Gr.CF8 (S/S 304) Investment Die-Cast
Spring Spring Steel (IS 4454 Gr. III)
Port Connection 1/4" BSP (NPT on request)
Operating Pressure 3.5 to 7 Bar
Position Indicator Nylon
Operating Cycles 350 to 650 Cycles /Hr
Media Dry Lubricated AirlInnert Gases MOISTURE SEPERATORS are advised to be used in line

Valve

Size 1/2" to 3" Screwed / Flanged
Body ASTM A351 Gr.CF8 / CF8M /CF3M
Stem Packing PTFE upto 180°C, Self-compensating (spring loaded)
Trim / Spindle Stainless Steel 304/316/316L
Seat Soft Seat(PTFE)
Gland Packing Teflon 'V' seals, backed by graphite wiper seal (Self compensating)
Body Test Pressure 24 Bar Maximum
End Connection Female Screwed to BSP or NPT / Flanged / Triclover
Working Fluid Press Refer to table
Leakage Drop tight / bubble tight, class IV ANSI B 16, 104, 1976
Operating Temp. On steam - Continous 155°C, Intermittent 180° C maximum (high Temp. above 180°C - On Request)
y type control valve
y type control valve